Mystic Chrome (MCH)

  • Sale
  • Regular price $209.00
Tax included.


Available sizes: 3m, 5m. 10m, 15m, 18m

Medium flexible chrome for decals and signs. Recommended for partial wrapping ONLY. Comes with a selection of 5 colours to create distinctive reflective chrome appearance. Dimensional stability -3 mm in 1 year.

Thickness of film (C=10 micron): 16C±0.5C
Thickness of film with release liner: 32C±0.5C
Type of film: Polymeric vinyl film with new air release channels 

Series: 180 series
Glue: Henkel solvent based moderate adhesive
Release liner: White silicone-coated paper with double-sided polyethylene coating
Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place
Indoor life: 3 years when followed rules of application and use
Outdoor life: 1-2 years when followed rules of application and use
Application: from +17°С to +25°С, usage from -55°С to +65°С
Dimensional stability: shrinkage less than 0,20%
Plastification: between 23%-31%
Package: Roll width 137 cm, length 18 m, weight 13 kg

Important note: The images, colours, and finishes on screen are approximate. For the real representation of the product always check the colour swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of colour may occur. One need to handle metalized films with care as the appearance of the metalized layer could change upon crumpling, overstretching, too strong heating. The film may scratch during application, or during a day in and out use. Scratching of the film is not covered by warranty.

Сaution:  Before purchasing and using, a customer shall determine the suitability of the product for its intended use and should have experience in wrapping metalized films. Current film has limited warranty for outdoor use on horizontal surfaces - up to 1 year. Actual performance depends on exposure conditions such as high temperature and pollution. We recommend laminating chrome films. We recommend using a steam vacuum or IRR heater for installation. The dry application only. Chrome films (CHMxxE, HCHxxG, MCHxx) can leave up to 30% adhesive residue. We recommend not heat film during uninstall. Please refer to Teckwrap Installation Guide for additional information.


Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods