TeckWrap 190 Series

Characteristics   TeckWrap 190 series

Film type

High performance multilayered film with ADT,  self-adhesive

Thickness of film (C=10 micron)

12-13C±0.5C

Thickness of film with release liner

17-18C±0.5C

Color range

See color swatch

Adhesive

HENKEL Solvent polyacrylate, permanent, high tack, air release drains

Adhesive color

Transparent

Release liner

Kraft white silicone-coated paper with double sided polyethylene coating, 145 g./m2

Exploitation period & Outdoor durability

When applied on the recommended surfaces in climatic zone of Central Europe the exploitation period is 3 years. The final period depends on surface exploitation factors, color of the film and climatic conditions. For details see chart bellow

Dimensional stability

Shrinkage less than 0,18%

Breaking Strength

25.4 N/10mm (Average) Test Method: ASTM D3759/D3759M-05

180º Peel Strength, to steel panel

6.6 N/10mm (Average) Test Method: ASTM D3330/D3330-04

Chemical resistance

Resists mild alkalis, mild acids, fuel, water, salt

Light Ageing in UV Exposure

Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 4-5 out of 5

Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-340 8h UV at (60±2.5)℃ BPT, 0.89W/(m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 48h

Plastification

Between 27%-33%

Package

Film is rolled colour-side-out on 8cm (diam) core. Roll is set into plastic cover and placed to carton box.

Roll standard size 1.52m x 18m (59.8" x 708,6", 4.98ft x 59ft, 1.66yd x 19,6yd)

Weight

13-14 kg

Shelf life

2 years from date of production. If stored in cooler temperatures +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place

Suitable surfaces

Flat and curved surfaces

Application temperature

+17°С to +25°С

In use temperature

-55°С to +65°С

Recommended temperature

-30°С to +30°С

Post heating

Over 100°С

Application method

Dry only